Advertisement
Quick Links
Assembly Guide
300mm - 600mm Wide Slimline Base Cabinet D300mm
IMPORTANT – Please read prior to installation
Thanks for purchasing a solid oak kitchen cabinet. Before you commence installation, please check the contents of
this package to ensure that all necessary components are included. Please contact us immediately via email if any
parts appear to be missing.
Please ensure that you assemble the goods in a clean, dry area, with plenty of space, and that you have the correct
tools and equipment to hand. We recommend that you read the instructions in full before you commence assembly,
and if necessary, run through the installation procedure without physically assembling any items before you begin.
Only construct one cabinet at a time, and follow the installation stages in order, without modi cation. During
installation, be careful to keep the relevant ttings for the current cabinet together. Do not over tighten screws, and
ensure that any larger panels are laid at and protected.
Clean the cabinets with a damp cloth, and if necessary a small amount of liquid soap, only. Do not use abrasives.
We provide a full cleaning and aftercare guide on our website, please view this for further information.
Advertisement
Related Manuals for Solid Wood Kitchen Cabinets 300mm - 600mm Wide Slimline Base Cabinet D300mm
Summary of Contents for Solid Wood Kitchen Cabinets 300mm - 600mm Wide Slimline Base Cabinet D300mm
- Page 1 Assembly Guide 300mm - 600mm Wide Slimline Base Cabinet D300mm IMPORTANT – Please read prior to installation Thanks for purchasing a solid oak kitchen cabinet. Before you commence installation, please check the contents of this package to ensure that all necessary components are included. Please contact us immediately via email if any parts appear to be missing.
- Page 2 Panels Hardware 20 x 15mm 25mm...
- Page 3 Insert as shown in the diagram below. Apply a small drop of glue to each dowel before inserting. Insert as shown ensuring the arrow marking is pointing towards the outside edge.
- Page 4 Connect the base panel to the side panel using the ttings inserted during steps 1 and 2. Repeat the process for top panel Slide the back panel between the grooves on the inside edge of panels It is advised that you run a small amount of glue along the grooves rst.
- Page 5 Connect the opposite side panel as shown Tighten all ttings by turning in direction of arrow with a screwdriver.
- Page 6 Fitting Cabinet Legs Position each foot mount towards the edge of the base panel at each corner. Ensure screw holes are not aligned over the panel join and that the overhang foot support is overlapping the side panel as shown below.
-
Page 7: Joining Cabinets
Joining Cabinets Cabinets should be joined be- tween each set of hinge holes on the inside edge of the side panel as shown in the diagram. Mark 25mm as a guide on a 3mm diameter drill bit using masking tape. Drill between the hinge holes into the cabi- net side panel (18mm) and 7mm into the next until you... - Page 8 Fitting Plinths Plinths Secure plinth to plinth clip using screw provided Clip each plinth clip onto the legs at the front of the cabinet.
Need help?
Do you have a question about the 300mm - 600mm Wide Slimline Base Cabinet D300mm and is the answer not in the manual?
Questions and answers