Dell Axim X3 Setup Manual page 2

Connect the Sync Cable OR the Cradle
3
Sync cable
Connect the USB connector on
the end of the sync cable to your
computer.
Cradle cable
Connect the USB connector on
the end of the cradle cable to your
computer.
4
Additional Information
• Rotate the scroll dial to
move the cursor and press
in to perform actions
similar to pressing
<Enter> on a keyboard.
• To adjust the brightness,
press and hold the scroll
dial and press the top or
bottom of the navigator
button.
• To dim the display, press
and hold the power
button. Repeat to light
the display.
Information in this document is subject to change without notice.
© 2003–2004 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is
strictly forbidden.
Dell, the DELL logo, and Axim are trademarks of Dell Inc.; Microsoft, Windows, Media,
and ActiveSync are registered trademarks of Microsoft Corporation. Dell disclaims
proprietary interest in the marks and names of others.
February 2004
OR |
| |
| |
|
Finding Information
• Dell User's Guide — Setting
up and using your device.
• Microsoft Pocket PC
Help — Tap Start→ → Help.
• Dell Companion CD —
Additional programs that
you can install.
• ActiveSync Help — Click
Help→ → Microsoft
ActiveSync Help on your
computer.
|
Docking With
the Cradle
Keep the front of the
device flush with the
front of the cradle, and
lower the device until
it is firmly seated in
the cradle. When the
device is docked, the
DELL logo on the
cradle lights up and
the connection status
icon appears on the
command bar.
Printed in China
Printed on recycled paper