Rear Panel - Roland XP-80 Quick Start Manual

Rear panel

POWER
AC
Power switch
Press to turn the power on/off.
AC inlet
Connect the AC power cable (included) to this inlet.
With units rated for 117V operation, the AC cable is
already connected to the unit.
CONTROL PEDAL
4 3 2 1 HOLD
CONTROL PEDAL 1–4 jacks
You can connect optional expression pedals to these
jacks. By assigning a desired function to a pedal, you
can use it to select or modify sound or perform vari-
ous other control. You can also connect optional pedal
switches to sustain sound.
HOLD jack
An optional pedal switch can be connected to this jack
for use as a hold pedal.
MIDI connectors
These connectors can be connected to other MIDI
devices to receive and transmit MIDI messages.
CLICK OUT DIRECT
LEVEL OUTPUT R
CLICK OUT LEVEL knob
Adjusts the level of the click sound to be output to
external devices.
CLICK OUT OUTPUT jack
Connect a cable to this jack when sending clicks to
external devices.
OUTPUT DIRECT R jack, OUTPUT DIRECT L jack
These jacks output only the direct sound (no effects
applied) or EFX'd sound in stereo.
MIDI
THRU OUT IN
OUTPUT
MIX
L R L PHONES
OUTPUT MIX R jack, OUTPUT MIX L jack
These jacks output the audio signal to the connected
mixer/amplifier system in stereo. For mono output,
use the L jack.
PHONES jack
An optional set of headphones can be connected to
this jack. Make sure that your headphones have an
impedance of 8–150 ohms.
5