Add Rhythmic 'Feel' To The Songs; Try Out Some User Groove Templates - Roland XP-80 Quick Start Manual

Add rhythmic 'feel' to the songs

The Groove Quantize function allows you to add a rhythmic 'feel' to your song by putting in
accents and changing timing for a more human or natural feel. You can easily vary the playing
'feel' by selecting different templates of different musical styles. Here's how you can use
Groove Quantize with the "21:QTZ_GRV!.SVQ(Try Groove)" contained in the demo disk.
No.
21
<Procedure>
Insert the demo disk into the disk drive.
Press [SEQUENCER].
Make sure that the cursor is located at the song number, and press the numeric key [2] and [1]
to select "21:QTZ_GRV!.SVQ(Try Groove)."
If the cursor is elsewhere, move it using [u] or [d], then select the song.
Press [STOP/PLAY] to play back the song.
Check the song's rhythm before performing Groove Quantize.
Press [F2] (Quantiz).
The message "This Song is not Internal Song. Load anyway?" will be displayed.
Press [F5] (OK) to load the song into internal memory.
Press [F3] (Groove).
The Groove Quantize display (SEQ/Quantize) will appear.
Press [STOP/PLAY] to audition the song (Preview).
Make sure that the cursor is positioned at the "Template Number," and turn the VALUE dial to
select a template from PRE:001–PRE:071.
If the cursor is elsewhere, move it using [u], then select the template.
As you switch templates, you'll notice the rhythmic 'feel' also changes.
If you select a number from USER:001–USER:016 before loading a user groove template,
Groove Quantize will not work.
To end preview, press [STOP/PLAY] again.

Try out some user groove templates

In addition to the templates stored in the XP-80's memory (PRE:001–PRE:071), you can also
select user groove templates for Groove quantization. User groove templates are those you can
manipulate for a Groove Quantize based on the feel of any songs you like.
The demo disk contains a user groove template file (U_TEMPLA.SVT) that holds 16 different
user groove templates. This lets you access various user groove templates covering different
musical categories. Load "21:QTZ_GRV!.SVQ (Try Groove)" into the XP-80's memory and try it
out.
<Procedure>
Insert the demo disk into the disk drive.
Press [SEQUENCER].
Make sure that the cursor is positioned at the song number, and press the numeric key [2] and
[1] to select "QTZ_GRV!.SVQ(Try Groove)."
If the cursor is elsewhere, move it using [u] or [d], then select a song.
18
File name Song name
QTZ_GRV!.SVQ Try Groove