Roland SoundCanvas SC-88 Pro Owner's Manual page 60

L
Spectrum
R
Band 1 (Band 1 gain)
Adjust the 250 Hz level.
Band 2 (Band 2 gain)
Adjust the 500 Hz level.
Band 3 (Band 3 gain)
Adjust the 1000 Hz (1 kHz) level.
Band 4 (Band 4 gain)
Adjust the 1250 Hz level.
Band 5 (Band 5 gain)
Adjust the 2000 Hz level.
Band 6 (Band 6 gain)
Adjust the 3150 Hz level.
Band 7 (Band 7 gain)
Adjust the 4000 Hz level.
Band 8 (Band 8 gain)
Adjust the 8000 Hz level.
Width (Band width)
Adjust the width of the frequency bands whose gain
is being modified (common to all bands). Higher
settings will make the frequency band narrower.
+Pan (Output pan)
Adjust the stereo location of the output sound. L63
is far left, 0 is center, and R63 is far right.
#Level (Output level)
Adjust the output level.
3: Enhancer
The Enhancer controls the overtone structure of the
high frequencies, adding sparkle and tightness to the
sound.
L
Enhancer
Enhancer
R
+Sens (Sensitivity)
Adjust the sensitivity of the enhancer.
#Mix (Mix level)
Adjust the ratio with which the overtones generated
by the enhancer are combined with the direct
sound.
Low Gain
Adjust the gain of the low frequency range.
Hi Gain
Adjust the gain of the high frequency range.
58
Pan
-12 - +12 [1]
-12 - +12 [2]
-12 - +12 [3]
-12 - +12 [4]
-12 - +12 [5]
-12 - +12 [6]
-12 - +12 [7]
-12 - +12 [8]
0.5/1.0/2.0/4.0/9.0 [9]
L63 - 0 - R63 [19]
0 - 127 [20]
[01H, 02H]
EQ
Mix
EQ
0 - 127 [1]
0 - 127 [2]
-12 - +12 [17]
-12 - +12 [18]
Chapter 4. Insertion Effects
Level (Output level)
Adjust the output level.
4: Humanizer
This adds a vowel character to the sound, making it
similar to a human voice.
L
Humanizer
R
Drive
Adjust the depth of distortion.
Drive Sw
Turn Drive on/off.
+Vowel
Select the vowel.
Accel
Adjust the time over which the sound will move to
the specified Vowel. Smaller values will require
more time.
Low Gain
Adjust the low frequency gain.
Hi Gain (High gain)
Adjust the high frequency gain.
Pan (Output Pan)
Adjust the stereo position of the output sound. L63
is far left, 0 is center, and R63 is far right.
#Level (Output level)
Adjust the output volume.
Effects that distort the sound (distortion
type)
5: Overdrive
This effect creates a soft distortion similar to that pro-
duced by tube amplifiers.
L
Over
drive Simulator
R
+Drive
Adjust the degree of distortion.
Amp Type (Amp simulator type)
Select the type of guitar amp.
Small : small amp
BltIn : single-unit type amp
2-Stk : large double stack amp
3-Stk : large triple stack amp
0 - 127 [20]
[01H, 03H]
EQ
Pan
0 - 127 [1]
Off/On [2]
a/i/u/e/o [3]
0 - 15 [4]
-12 - +12 [17]
-12 - +12 [18]
L63 - 0 - R63 [19]
0 - 127 [20]
[01H, 10H]
Amp
EQ
Pan
0 - 127 [1]
Small/BltIn/2-Stk/3-Stk [2]