Roland SoundCanvas SC-88 Pro Owner's Manual page 199

40 1x 0B 00 00 01 00 - 01
40 1x 0C 00 00 01 00 - 01
40 1x 0D 00 00 01 00 - 01
40 1x 0E 00 00 01 00 - 01
40 1x 0F 00 00 01 00 - 01
40 1x 10 00 00 01 00 - 01
40 1x 11 00 00 01 00 - 01
40 1x 12 00 00 01 00 - 01
40 1x 13 00 00 01 00 - 01
40 1x 14 00 00 01 00 - 02
* ASSIGN MODE is the parameter that determines how voice assignment will be handled when sounds overlap on identical note numbers in the same channel (i.e., repeatedly
struck notes). This is initialized to a mode suitable for each Part, so for general purposes there is no need to change this.
40 1x 15 00 00 01 00 - 02
* This parameter sets the Drum Map of the Part used as the Drum Part. This unit can simultaneously (in different Parts) use up to two Drum Maps (MAP1, MAP2). With the ini-
tial settings, Part10 (MIDI CH=10, x=0) is set to MAP1 (1), and other Parts are set to normal instrumental Parts (OFF(0)).
Address(H) Size(H) Data(H)
40 1x 16 00 00 01 28 - 58
40 1x 17 00 00 02 08 - F8
40 1x 18#
* PITCH OFFSET FINE allows you to alter, by a specified frequency amount, the pitch at which notes will sound. This parameter differs from the conventional Fine Tuning
(RPN #1) parameter in that the amount of frequency alteration (in Hertz) will be identical no matter which note is played. When a multiple number of Parts, each of which has
been given a different setting for PITCH OFFSET FINE, are sounded by means of an identical note number, you can obtain a Celeste effect.
40 1x 19 00 00 01 00 - 7F
40 1x 1A 00 00 01 00 - 7F
40 1x 1B 00 00 01 00 - 7F
40 1x 1C 00 00 01 00 - 7F
40 1x 1D 00 00 01 00 - 7F
40 1x 1E 00 00 01 00 - 7F
40 1x 1F 00 00 01 00 - 5F
40 1x 20 00 00 01 00 - 5F
40 1x 21 00 00 01 00 - 7F
40 1x 22 00 00 01 00 - 7F
40 1x 23 00 00 01 00 - 01
* When "General MIDI System On" is received, Rx.BANK SELECT will be set OFF. When "GS Reset" or "System Mode Set" is received, it will be set ON.
40 1x 24 00 00 01 00 - 01
* When RX BANK SELECT LSB = OFF, Bank Select LSB (Bn 20 11) will be treated as 00H regardless of its value.
40 1x 2A 00 00 02 00 00 - 40 00 - 7F 7F
40 1x 2B#
40 1x 2C 00 00 01 00 - 7F
* In MODE-2 (Double module mode), DELAY SEND LEVEL cannot be used.
Rx. MODULATION
Rx. VOLUME
Rx. PANPOT
Rx. EXPRESSION
Rx. HOLD1
Rx. PORTAMENTO
Rx. SOSTENUTO
Rx. SOFT
MONO/POLY MODE
ASSIGN MODE
USE FOR RHYTHM PART
Parameter
PITCH KEY SHIFT
PITCH OFFSET FINE
PART LEVEL
VELOCITY SENSE DEPTH
VELOCITY SENSE OFFSET
PART PANPOT
KEYBOARD RANGE LOW
KEYBOARD RANGE HIGH
CC1 CONTROLLER NUMBER
CC2 CONTROLLER NUMBER
CHORUS SEND LEVEL
REVERB SEND LEVEL
Rx.BANK SELECT
RX BANK SELECT LSB
PITCH FINE TUNE
DELAY SEND LEVEL
Chapter 8. Appendix
OFF / ON 01
OFF / ON 01
OFF / ON 01
OFF / ON 01
OFF / ON 01
OFF / ON 01
OFF / ON 01
OFF / ON 01
Mono / Poly 01
(=CC# 126 01 / CC# 127 00)
0 = SINGLE SC-88/Native MAP
1 = LIMITED-MULTI 01
2 = FULL-MULTI SC-55 MAP
00 at x=0
01 at x 0
0 = OFF 00 at x 0
1 = MAP1 01 at x=0
2 = MAP2
Description
-24 - +24 [semitones]
-12.0 - +12.0 [Hz]
Use nibblized data.
0 - 127
(=CC# 7)
0 - 127
0 - 127
-64(RANDOM),
-63(LEFT) - +63(RIGHT)
(=CC# 10, except RANDOM)
(C-1) - (G9)
(C-1) - (G9)
0 - 95
0 - 95
0 - 127
(=CC# 93)
0 - 127
(=CC# 91)
OFF / ON
[88] OFF / ON
[88] -100 - 0 - +100 [cent]
(= RPN#1)
[88] 0-127
(=CC# 94)
ON
ON
ON
ON
ON
ON
ON
ON
Poly
LIMITED-MULTI
SINGLE (Drum Part)
LIMITED-MULTI (Normal Part)
OFF (Normal Part)
MAP1 (Drum Part)
Default Value (H) Description
40 0 [semitones]
08 00 0 [Hz]
64 100
40 64
40 64
40 0 (CENTER)
00 C-1
7F G 9
10 16
11 17
00 0
28 40
01(00*) ON(OFF*)
01 ON
40 00 0
00 0
197