Before You Play; Connecting The Power Cord; Setting The Music Stand; Opening And Closing The Lid - Roland pt-2000 Owner's Manual

Roland owner's manual digital piano pt-2000
Table of Contents

Advertisement

Before You Play

Connecting the Power Cord

* To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
1. Connect the supplied power cord to the AC
Inlet socket on the rear panel of the unit.
fig.2-01
AC
2. Plug the other end of the power cord into a
wall outlet.

Setting the Music Stand

Insert the music stand into the two holes as
shown in the figure below.
fig.2-02

Opening and Closing the Lid

1. When opening the pt-2000's lid, grasp the
lid with both hands and gently lift it
upwards, then slide it towards the back of
the piano.
2. When closing the lid, slowly pull the lid
forward, then gently lower it into place.
Do not insert your hands into the inside of the
piano through the space between the lid and the
keyboard.
* Make sure an adult is on hand to provide assistance when
young children are playing the pt-2000.
* For safety, transport the keyboard only with the lid in the closed
position.

About the Pedals

fig.2-04.e
Soft Pedal
Sostenuto Pedal
Soft Pedal
This pedal softens the sound.
Playing with the soft pedal depressed produces a sound that
is not as strong as when otherwise played with the
equivalent strength.
Sostenuto Pedal
With the sostenuto pedal, only the sound played at the
moment the pedal is pressed is sustained.
Damper Pedal
Use this pedal when you want the sound to linger.
While the damper pedal is depressed, the sound from the
keyboard continues to linger/remain for an extended period,
even when you remove your fingers from the keys.
About the Adjuster
After you have moved this piano, or when you feel it is
unstabled, lower the adjuster at the bottom of the pedal
board as follows:
Lower the adjuster so that it is firmly in contact with
the floor. If there is a gap between the adjuster and the
floor, the unit may malfunction when the pedal is
pressed. In particular when the instrument is placed
on a carpeted floor, you must lower the adjuster so
that it presses strongly against the floor.
Damper Pedal
Adjuster
7

Advertisement

Table of Contents
loading

Table of Contents