Changing The Bend Range (Pedal Setting) - Roland KR-115 Owner's Manual

❍ Functions that can be assigned (Expression
Pedals Only)
Function
Expression
Adjusts the overall volume.
When the pedal is pressed during a layer
performance, the Tone volume changes
between two levels, depending on how
firmly the pedal is pressed.
Pressing the pedal with "Pedal EX1"
EX1
selected increases the layer Tone volume.
The layer Tone is played at a fixed volume,
regardless of how forcefully the keys are
played.
Pressing the pedal with "Pedal EX2"
selected increases the layer Tone volume,
while the volume of the right-hand Tone is
EX2
decreased. The layer Tone is played at a
fixed volume, regardless of how forcefully
the keys are played.
Pressing the pedal with "Pedal EX3"
EX3
selected increases the layer Tone volume.
Pressing the pedal with "Pedal EX4"
selected increases the layer Tone volume,
EX4
while the volume of the right-hand Tone is
decreased.
Explanation
Chapter 10 Various Settings
■ Changing the Bend Range
(Pedal Setting)
The effect of smoothly raising or lowering the pitch of a
played note is called the "bender effect."
You can assign the bender function to a pedal, then apply the
bender effect by depressing and releasing the pedal.
You can also make a setting that determines how much the
pitch of the note changes when you apply the bender. The
maximum range of change in pitch is called the "bend
range."
At Step 3 "Procedure" (p. 165), touch <Pedal Setting>.
Touch to switch the screens.
fig.d-pedalset.eps_50
Touch <Bend Range>
setting.
You can set this to any value within a range of 1 to 12 (in
half-tone steps, up to one octave).
to adjust the bend range
169