Naming The Settings; Copying The Settings - Boss Dr. Rhythm DR-3 Owner's Manual

Parameter Value
Hi Damp / 400 Hz–
Freq 16 kHz
Low Cut / 20 Hz–
Freq 2.0 kHz
250 Hz–
High Cut /
14.0 kHz,
Freq
FLAT

■ Naming the Settings

Select a <NAME> on step 4 in p. 56, then press
[ENTER].
You can edit the name of the currently selected
Ambience setting, using up to six characters for
the name.
fig.09-27d
Press [ ] [ ] to move to the point where you
want to enter the character(s).
Each time you press [ENTER], it switches
between upper and lower case for the text being
input.
Turn the VALUE dial to select the character.
When you have finished making the setting,
press [EXIT] a number of times until you exit Edit
mode.
Chapter 5 Changing the Overall Tone of the Sound and Acoustics (TSC)
Description
This parameter adjusts the
standard frequency at which
the high-frequencies are
damped. The reverb sound in
the band above the standard
frequency is damped.
This parameter adjusts the
frequency at which the low-
frequencies are cut.
This parameter adjusts the
frequency at which the low-
frequencies are cut. No effect
occurs when set to "FLAT."

■ Copying the Settings

Select a <COPY> on step 4 in p. 56, then press
[ENTER].
Copy the currently selected Ambience setting to
the User settings (U1–U8).
fig.09-28d
Turn the VALUE dial to select the number for the
Ambience to be copied, then press [
fig.09-29d
Turn the VALUE dial to select the copy-
destination Ambience number, then press [
fig.09-30d
Press [ENTER] to execute the copy.
If you press [ ], the copy is cancelled, and
you're taken back to the screen you were in
immediately before that.
When you have finished making the setting,
press [EXIT] a number of times until you exit Edit
mode.
].
].
57