Do you have a question about the Dr. Rhythm DR-550MKII and is the answer not in the manual?
Questions and answers
Sean F Romero
March 21, 2025
dr550 not working click track i can hear but i cant hear drums or cymbals
1 comments:
Mr. Anderson
March 21, 2025
If the drums and cymbals are not audible on the Boss Dr. Rhythm DR-550MKII while the click track is working, consider the following possible causes and solutions:
1. Volume Settings – Check the volume level of the DR-550MKII. Ensure the main volume is turned up and not set too low.
2. Mute or Accent Settings – Some drum voices may be muted or have low accent levels. Ensure that the drum and cymbal sounds are properly assigned and not muted.
3. Output Connections – Verify that the audio cables are correctly connected to the output jack. If using headphones, ensure they are fully plugged in.
4. Pattern or Kit Selection – Some patterns may not have drum or cymbal sounds assigned. Try selecting a different preset pattern or drum kit.
5. MIDI Settings – If using external MIDI equipment, confirm that the MIDI settings are correct and that the DR-550MKII is receiving or sending the expected signals.
6. Battery or Power Issues – If running on batteries, they may be low. Try using an AC adapter or fresh batteries.
7. Factory Reset – If none of the above steps work, consider performing a factory reset to restore default settings.
If the problem persists, there may be a hardware issue requiring professional repair.
Need help?
Do you have a question about the Dr. Rhythm DR-550MKII and is the answer not in the manual?
Questions and answers
dr550 not working click track i can hear but i cant hear drums or cymbals
If the drums and cymbals are not audible on the Boss Dr. Rhythm DR-550MKII while the click track is working, consider the following possible causes and solutions:
1. Volume Settings – Check the volume level of the DR-550MKII. Ensure the main volume is turned up and not set too low.
2. Mute or Accent Settings – Some drum voices may be muted or have low accent levels. Ensure that the drum and cymbal sounds are properly assigned and not muted.
3. Output Connections – Verify that the audio cables are correctly connected to the output jack. If using headphones, ensure they are fully plugged in.
4. Pattern or Kit Selection – Some patterns may not have drum or cymbal sounds assigned. Try selecting a different preset pattern or drum kit.
5. MIDI Settings – If using external MIDI equipment, confirm that the MIDI settings are correct and that the DR-550MKII is receiving or sending the expected signals.
6. Battery or Power Issues – If running on batteries, they may be low. Try using an AC adapter or fresh batteries.
7. Factory Reset – If none of the above steps work, consider performing a factory reset to restore default settings.
If the problem persists, there may be a hardware issue requiring professional repair.
This answer is automatically generated