Safety Precautions; Preparation - Samsung AE090MNYDEH Installation Manual

Safety precautions

All materials supplied to this manual are indispensable for the
safety of equipment.
Users shall establish appropriate safety and health practices
and determine the applicability of regulatory limitation based
on following descriptions prior to use.
WARNING
• Always disconnect the air to water heat pump from the
power supply before servicing it or accessing its internal
components.
• Verify that installation and testing operations are
performed by qualified personnel.
• Verify that the air to water heat pump is not installed in an
easily accessible area.
GENERAL INFORMATION
WARNING
• Carefully read the content of this manual before installing the
air to water heat pump and store the manual in a safe place in
order to be able to use it as reference after installation.
• For maximum safety, installers shall always carefully read the
following warnings.
• Store the user and installation manual in a safe location and
remember to hand it over to the new owner if the air to water
heat pump is sold or transferred.
• This manual explains how to install SAMSUNG TDM Plus
product. The use of other types of units with different control
systems may damage the units and invalidate the warranty.
The manufacturer shall not be responsible for damages arising
from the use of non compliant units.
• The manufacturer shall not be responsible for damage
originating from unauthorized changes or the improper
connection of electric and hydraulic lines. Failure to comply
with these instructions or to comply with the requirements set
forth in the "Operating limits" table, included in the manual,
shall immediately invalidate the warranty.
• Do not use the units if damaged. If problems occur, switch the
unit off and disconnect it from the power supply.
• In order to prevent electric shocks, fires or injuries, always stop
the unit, disable the protection switch and contact SAMSUNG's
technical support if the unit produces smoke, if the power cable
is hot or damaged or if the unit is very noisy.
• Always remember to inspect the unit, electric connections,
refrigerant tubes and protections regularly. These operations
should be performed by qualified personnel only.
• The unit contains moving parts, which should always be kept
out of the reach of children.
• Do not attempt to repair, move, alter or reinstall the unit. If
performed by unauthorized personnel, these operations may
cause electric shocks or fires.
• Do not place containers with liquids or other objects on the
unit.
• All the materials used for the manufacture and packaging of
the air to water heat pump are recyclable.
• The packing material and exhaust batteries of the remote
control(optional) must be disposed of in accordance with
current laws.
• The air to water heat pump contains a refrigerant must be
disposed in authorized center or returned to retailer as special
wastes.
• Do not disassemble and alter the heater at your own discretion.
INSTALLING THE UNIT
IMPORTANT: When installing the unit, always remember to
connect first the refrigerant tubes, then the electrical lines.
Always disassemble the electric lines before the refrigerant
tubes.
• Upon receipt, inspect the product to verify that it has not been
damaged during transport. If the product appears damaged,
DO NOT INSTALL it and immediately report the damage to the
carrier or retailer (if the installer or the authorized technician
has collected the material from the retailer.)
• After completing the installation, always carry out a functional
test and provide the instructions on how to operate the air to
water heat pump to the user.
• Do not use the air to water heat pump in environments with
hazardous substances or close to equipment that release free
flames to avoid the occurrence of fires, explosions or injuries.
3
English