Removing An Sfp Module - Yamaha SWR2311P-10G Owner's Manual

3.
To the connector, connect a fiber optic cable
that is suitable for each module.

■ Removing an SFP module

Secure this unit so that it will not move, and while grasping the lever of the SFP module, pull
it slowly toward yourself to remove the module from the SFP port.
NOTE
For details on installation, removal, and points of caution, refer to the "SFP-SWRG-LX SFP-
SWRG-SX Owner's Manual" included with the SFP module.
1.
Detach the fiber optic cable.
2.
If the SFP module is connected to the upper
row of ports, lower the SFP module's lever.
If it is connected to the lower row of ports, raise the lever.
Caution
Do not look into the optical emitter when the SFP module is installed.
The separately sold SFP modules are class 1 laser devices. They may emit laser beams
invisible to the eye. If the laser beam enters your eye, your eyesight might be damaged.
3.
Grasp the lever and pull out the SFP module.
NOTE
Since this unit supports hot-swapping, an SFP module can be
removed without turning the power off.
Connector
Connector
SWR2311P-10G Owner's Manual
Connections
Fiber optic cable
Fiber optic cable
Lever
29