Table of Contents
Advertisement
Controls and Connectors
F
Wall mount accessory attachment holes
Use these holes to attach the WK-SWR wall mount accessory.
Refer to "Installation on a wall or ceiling" (page 22) for information on how to install the
unit.
Switching the display mode
Each time you press the MODE button, the display mode of the port indicators is switched.
The lit status and color of the upper and lower MODE indicators shows the selected display
mode.
Unlit:
(when the initial display mode is LINK/ACT)
Mode name
1
LINK/ACT
2
PoE
3
VLAN
4
STATUS
5
OFF
1 Back to LINK/ACT
16
SWR2311P-10G Owner's Manual
Lit (green):
Lit state of the mode indicators
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
LED MODE
LINL/ACT
PoE
VLAN
STATUS
Lit (orange):
Upper Lit (green)
Lower Unlit
Upper Lit (orange)
Lower Unlit
Upper Unlit
Lower Lit (green)
Upper Unlit
Lower Lit (orange)
Upper Unlit
Lower Unlit
Explanation
The left indicator of the LAN
port or SFP port shows the link
status, and the right indicator
shows the connection speed.
Indicates the power supply sta-
tus of the LAN port.
Indicates the VLAN ID specified
for the LAN port or SPF port.
Indicates the error status of the
LAN port or SFP port.
Turns off the indicators of the
LAN ports and SFP ports.
Advertisement
Table of Contents
