ESAB Aristo Tech User Instructions

Warning
The auto-darkening filters fitted in the Aristo ® Tech helmets only resist a certain amount of heat. Please do not place them near naked flames or hot
work areas etc. Operating temperature of electronic filter minus 10ºC to plus 55ºC. Materials that may get in contact with the wearers skin could cause
Allergic reactions to susceptible individuals
Certification and Control labels
The Aristo ® Tech welding filters are tested for eye protection by the following notified body: DIN Prüf-und Zertifizierungsstelle für Augenschutz,
Westliche 56, D 75172 Pforzheim, notified body 0196, that provides approval and continual quality system under the control of the European
Commission, the German Ministry for Work and the Central Office of the Provinces.
We are therefore allowed to use the following marks:
Address from DIN CERTCO as Notified Body 0196
European Conformity mark.
This confirms that the product DIN CERTCO Gesellschaft für
Konformitätsbewertung mbH
fulfils the requirements of the
Gartenstraße 133
Directive 89/686/EWG
D-73430 Aalen
GERMANY
ADF Marking Explaination:
CE 4/5-13 ESAB 1/1/1/2 EN379
4 - light state scale number
5- lightest dark state scale number
13 darkest state scale number
ESAB - Manufactures identification
1 - Optical class
1 - Diffusion of light class
1 - variation in luminous transmittance class
2 – angle dependency class
379 - Number of the standard
ESAB Group (UK) Ltd
Hanover House
Queensgate,
Britannia Road,
Waltham Cross,
Hertfordshire EN8 7TF
England
www.esab.co.uk
ESAB AB operates a policy of continuous improvement. We therefore reserve the right to make changes and improvements to any of our products without notice.
EN 379
WELDING HELMET
USER INSTRUCTIONS
ATECH-01-UI-Ra