Playing Back A File; Selecting A File To Play Back - Roland SONAR V-STUDIO VS-100 Hardware Manual

Using the WAVE recorder

Playing back a file

1.
Press the
2.
Use the [PLAYBACK] knob to adjust the playback volume.
If the sampling frequency of the file being played differs from the sampling frequency setting of the SONAR
V-STUDIO 100, you may hear a small amount of noise when the file is playing or stopped. In this case, refer to
"Sampling frequency setting" (p. 52) and set the SONAR V-STUDIO 100's sampling frequency to match the
sampling frequency of the file you're playing.

Selecting a file to play back

The SONAR V-STUDIO 100 cannot play back files that are inside a folder. When using a computer to copy
files for playback to SD memory, you must copy them to the root folder.
1.
In the main screen, press the [CURSOR/VALUE] knob to open the finder screen (p. 26).
2.
In the finder screen, turn the [CURSOR/VALUE] knob to select the file that you want to play back.
fig.finder-screen.eps
3.
In the next screen, ensure that "Select" is highlighted and press the [CURSOR/VALUE] knob.
fig.finder-screen2.eps
30
(Playback) button.