Introduction; Serial Number Information - Genie TZ-34/20 Service Manual

Introduction

Introduction
Important
Read, understand and obey the safety rules and
operating instructions in the appropriate operator's
manual on your machine before attempting any
maintenance or repair procedure.
This manual provides detailed scheduled
maintenance information for the machine owner
and user. It also provides troubleshooting fault
codes and repair procedures for qualifi ed service
professionals.
Basic mechanical, hydraulic and electrical skills
are required to perform most procedures. However,
several procedures require specialized skills,
tools, lifting equipment and a suitable workshop.
In these instances, we strongly recommend that
maintenance and repair be performed at an
authorized Genie dealer service center.
Compliance
Machine Classifi cation
Group B/Type 3 as defi ned by ISO 16368
Machine Design Life
Unrestricted with proper operation, inspection and
scheduled maintenance.
Technical Publications
Genie has endeavored to deliver the highest
degree of accuracy possible. However, continuous
improvement of our products is a Genie policy.
Therefore, product specifi cations are subject to
change without notice.
Readers are encouraged to notify Genie of errors
and send in suggestions for improvement. All
communications will be carefully considered for
future printings of this and all other manuals.
Contact Us:
http://www.genielift.com
e-mail: awp.techpub@terex.com
ii

Serial Number Information

Genie offers the following Service Manual for
these models:
Title
TZ-34/20 Service Manual ...................................... 84382
From SN TZ3403-001 to TZ3416J-3099
and from SN TZ34J-3100
Copyright © 2011 Terex Corporation
825934 Rev D August 2016
Third Edition, Third Printing
"Genie" and "TZ" are registered trademarks of
Terex South Dakota, Inc. in the USA and many
other countries.
Printed in U.S.A.
Genie TZ-34/20
Printed on recycled paper
Part No. 825934
April 2016
Part No.