Changing The Beat; Adjusting The Volume - Roland F-100 Owner's Manual

■ Changing the Beat

To change the beat, specify the beat by pressing the key (A0–E1) to which
the beat is assigned.
You can select from the following five types: 0 (only upbeat sounds),
2 (2-beat), 3 (3-beat), 4 (4-beat), 6 (6-beat).
fig.02-07
Volume
Min Max
0 2 3 4 6
1.
Hold down the [
press the key to which the beat is assigned.

■ Adjusting the Volume

You can adjust the volume of the metronome and rhythm (p. 20) to any of
five possible levels.
The setting is at "3" when the power is turned on.
fig.02-08
1
Piano
Reverb
1.
Hold down the [
press one of the Tone buttons.
The Tone button indicator will blink to indicate the current volume, when
press and hold the [
Variation
Dual Balance
Harpsi-
Piano
Reverb E.Piano chord Organ Strings Variation Song Play
1
Dual Balance Key Touch
(Metronome/Rhythm)] button and
2 3 4 5
Harpsi-
E.Piano chord Organ Strings
Press
(Metronome/Rhythm)] button and
(Metronome/Rhythm)] button.
Song
Key Touch
Recorder
Rec Track
2
Increase the metronome
volume
Variation
Dual Balance Key Touch
While holding down...
Playing the Keyboard
It is not possible to change
the beat during song
playback or recording.
Song
19