Turning The Power On And Off; Turning On The Power; Turning Off The Power; Adjusting The Sound's Volume And Brilliance - Roland DP-900 Owner's Manual

Before You Start Playing

Turning the Power On and Off

■

Turning On the Power

Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction
and/or damage to speakers and other devices.
1. Turn the [Volume] knob completely to the left to
lower the volume to the minimum level.
fig.00-04
2. Push the [Power] switch to turn on the DP-900.
After a few seconds, the unit becomes operable and
playing the keyboard produces sound.
Adjust the volume to obtain the proper volume level.
fig.00-05.e
This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
■

Turning Off the Power

1. Turn the [Volume] knob completely to the left to
lower the volume to the minimum level.
fig.00-04
2. Push the [Power] switch to turn off the DP-900.
fig.00-06
14
941
Lower position
ON
942
Upper position
OFF
Adjusting the Sound's Volume
and Brilliance
Turn the [Volume] knob to adjust the overall
volume.
Press the [Brilliance] button to adjust the
brightness of the sound.
Select one of the three available settings to obtain the desired
brilliance.
[Brilliance]
button's indicator
Brilliance
fig.00-07.e
Min Max
Raising the volume excessively may cause the sound to
distort. Enjoy the piano at an appropriate volume level.
Off Lit in red
Medium Mellow
Lit in
green
Bright