Layering Two Instrument Sounds- Dual Play - Roland DP-1000 Owner's Manual

fig.4-03.e
While holding down...
2.
After releasing the button, play the keyboard.
The button indicator stops blinking and stays on, indicating that the tone selected in Step
1 has been assigned to the [Tone] button.
Layering Two Instrument Sounds— Dual Play
Playing with two different tones on the keyboard simultaneously is called "Dual Play."
Layering the Piano tones and Strings tones
1.
First, assign the Strings tone to the [Tone] button.
fig.4-04.e
Tone
While holding down...
Tone
When assigning tones to the [Tone] button, the tone is set by first selecting the
tone in Step 1 (indicator blinks), then playing the keyboard in Step 2 (indicator is
lit). You can also set the tone by pressing the blinking [Tone] button instead of
playing the keyboard. If you don't want to set the tone, then press the [Piano]
button.
Press
Press
Playing the keyboard sets
the assigned tone.
Playing the Keyboard
Release the button and
play the keyboard.
13