Measured Value Display - Siemens SITRANS P DS III Operating Instructions Manual

Characteristic curve "lin":
Characteristic curve "sroff"
6.5.12

Measured value display

Note
To use the operating functions with the buttons, first set the device variable (DV) parameters
with a host system such as SIMATIC PDM. You will finds details of the relation between
primary variable (PV) assignment and the DV in the following section:
Measuring mode "Pressure" (Page 108)
SITRANS P DS III with HART
Operating Instructions, 06/2013, A5E00047092-09
Square root extracting characteristic curve
"srlin"
Characteristic curve "srli2"
Operation
6.5 Local operation
99