Honeywell Lyric Gateway Quick Start Quide

Lyric™ Gateway
Getting Started
The Lyric Gateway combines a security system and home automation with
flexibility to operate your system directly from the Gateway's Touchpad, or
from a mobile (smart) device (smart phone, tablet, PC, etc.) using either the
MyHome Gateway™ App or Total Connect™ App.
Download and install the Apps from your mobile device's App Store.
Other Options to Operate Your Gateway Security Features:
Wireless Keys (Key Fobs)
SiXFOB 5834-4
IMPORTANT SECURITY NOTICE
If using wireless keys: your key fob is similar to your
keys or access card. If lost or stolen, another person
can compromise your security system. Immediately
notify your Dealer/Installer of a lost or stolen key
fob. The Dealer/Installer will then remove the key
fob programming from the security system.
To... Press...
code
Arm your
system
code
Quick Arm
your
for 3 seconds
system
Disarm
your
user code
system
Switching Arming Modes:
When the system is armed or while arming or disarming, you can press
any arming option and enter your user code to quickly switch between
arming modes. This feature is available only from the Touchpad or a
wireless key.
Auto-Home Mode: If your system is programmed to do so, it will
automatically arm in Home mode if you select Armed Away but no one
opens an exit-delay door.
To... Press...
an Emergency Type
Signal an
Emergency
Canceling and Clearing Alarms / Emergencies
Wireless
Keypads User Code
If the Lyric Gateway is beeping rapidly when you enter the
premises, an alarm has occurred during your absence and an
intruder may still be on the premises.
LEAVE IMMEDIATELY and CONTACT THE POLICE from a nearby
safe location.
LKP500
Arming Options
The system...
Arms in Away mode, for
and enter your user
when no one will be home.
Arms in Home mode, for
and enter your user
when someone will be
home.
Quick Arms your system
or
without a user code (if
programmed to do so)
and enter your
Disarms
Emergency Options
The system...
then select If programmed to do so,
notifies the monitoring
company that a
fire/police/medical
emergency exists.
or
Enter your User Code The Alarm will silence
and the system will announce the status.
Check for alarm details on MyHome Gateway
App or Total Connect Remote Services.
Enter a User Code again to clear alarms.
IMPORTANT!
System Sounds
When you hear... It means...
Beeping Touchpad options are being pressed, entry/exit
countdowns have begun, and other functions*
Announcements or A system condition exists, or a zone has been faulted.
Chime (Voice announcements, chimes and most sounds are
adjustable through the MyHome Gateway™ App)
Sounders or Sirens System is in Alarm.
blaring (internal Alarm volume is not adjustable.
and/or external)
*NOTE: A beep every 45 seconds indicates one of your wireless devices has a low battery
condition. Use MyHome Gateway App to see which device(s) need new batteries.
Gateway Menu Mode
The Gateway Menu Mode provides options to add and delete mobile
(smart) devices from your system or change the system Wi-Fi
network. When the System is disarmed and the number keys are off,
enter the Master Code and
1 1 to hear a list of the available menu mode options
2 0 to delete all enrolled MyHome Gateway Apps. [Deleted devices
will have to be re-enrolled for them to operate your Gateway.]
2 1 to enroll or re-enroll devices you want to use to operate your
Gateway with the MyHome Gateway App.
3 1 to enter the Gateway in Access Point mode; used to change your
Wi-Fi setup if your network connection/router changes.
To operate additional features of your Gateway: Use either the
MyHome Gateway™ App for local control, or the Total Connect™
App to remotely operate your Gateway system from a mobile
(smart) device.
Adding Mobile Devices to your Gateway
Up to 8 mobile devices can operate your Gateway system with the
MyHome Gateway App. To add a device:
1. Download the Honeywell MyHome Gateway App to the mobile device(s)
that will be used to control your system.
2. Ensure each mobile device is connected to the same Wi-Fi network the
Gateway is on (check Settings > Wi-Fi on the device).
3. On the Gateway Touchpad, enter the Master code and 2 1 to ensure the
Gateway is in enrollment mode.
4. Launch the MyHome Gateway App on a device. The App will display a six-
digit enrollment number.
5. Enter that six-digit number on the Gateway Touchpad.
6. When prompted, enter a valid user code on the MyHome Gateway App
screen. The screen will confirm the enrollment success and open the
MyHome Gateway App Home screen.
7. Follow the prompts on screen and throughout the User Guide / User
Reference Guide to operate your system with the MyHome Gateway App.
For full details of all user functions, please see the system's
Quick User Guide and User Reference Guide located online at:
http://www.security.honeywell.com/hsc/products.
These manuals also available from your installer upon request.