Annex 5: List Of Command Sets - Bodet NETSILON 7 User Manual

9.5 Annex 5: list of command sets
List of Netsilon commands:
Category
General
System
Synchronisation
Alarm
Tools
Network
Command
helpcli
systemversion
systemoptioncard
systemlistservices
systemservice [service] [ON/OFF]
systemlanguage [FR/UK/ES/DE/NL/IT]
systemtimeget
systemstratlevel
systempoweracstatus
systempowerdcstatus
synccurentsource
syncsystemstatus
syncgpscurrentnbsat
alarmnbminor
alarmnbmajor
alarmnbcritical
toolpreupdate
toolupdate
toolrestore
toolreboot
toolshutdown
toolcancel
net4getinfo
net4getdhcp [interface]
net4setdhcp [interface] [ON/OFF]
net4getdns [interface]
Description
List of all commands
Displays the versions of Netsilon and its
option cards
List of installed option cards
Displays the status of services
Change the status of a service
Change the language of Netsilon
Displays the local time
Indicates the strat number of Netsilon
Indicates the status of the AC power
Indicates the status of the DC power
Indicates the reference source
Indicates the status of the system
Indicates the number of satellites
detected
Indicates the number of active minor
alarms
Indicates the number of active major
alarms
Indicates the number of active critical
alarms
Prepares Netsilon to receive an update
file
Runs the update previously copied to
Netsilon
Restores to factory settings and restarts
Netsilon
Restarts Netsilon
Shuts Netsilon down
Cancels a command in progress. Valid
only for toolrestore, toolreboot and
toolshutdown.
Displays the IPv4 parameters of all ports
or the requested port: IP address and
gateway
Indicates the DHCP status of all ports or
the requested port
Interface =0 or 1 or 2 or 3 or 4 or 5
Activates or deactivates DHCP mode
Interface =0 or 1 or 2 or 3 or 4 or 5
Indicates the DNS server of all ports or
the requested port
Interface =0 or 1 or 2 or 3 or 4 or 5
73