Pulse Expansion Card (Ref. 907942) - Bodet NETSILON 7 User Manual

4.7.2. PULSE expansion card (ref. 907942)
The PULSE expansion card enables wired time distribution by pulse every minute or ½ minute at 24VDC parallel.
To configure the PULSE output, follow these steps:
1) TIME menu > Outputs > Slot D: 24V pulse:
2) Configure the output by clicking
3) Select the time zone which will be transmitted via the PULSE expansion card output.
4) Select the impulse type: Minute or ½ minute.
5) Set the pulse length in seconds.
6) Enable the output using the
The button can be used to configure the dial time
The dial time is the reference time on which the network clocks are positioned before commissioning or during a time
1
reset.
, and the following window will appear:
button, then save.
and its polarity (negative or positive).
1
41