Ninja BL770 30 Owner's Manual page 8

Assembly and Use for the Blender Pitcher - cont.
USE
Fig. 6
WARNING: Never leave the appliance unattended
while in use.
9 Select the speed that best suits your needs. (Fig. 6)
NOTE: Pulse ingredients for even chopping by pressing
down in short intervals.
10 When you have reached your desired consistency, stop
the appliance by pressing the power button ( ) and
wait for the attachment to stop turning. (Fig. 7)
11 To remove the lid, press the release button on the lid,
pull the lid handle up to a 90° angle and lift the lid off.
Turn the pitcher counter clockwise and then lift off the
base. (Fig. 7, Fig. 8)
CAUTION: Never insert your hands in the pitcher
as the blades are sharp. Always use a spatula to
dislodge food that has stuck to the sides of the
pitcher.
7 1-877-646-5288
Fig. 7
REMOVAL
Fig. 8
12 Depending on the consistency of the contents in the
container, open the pour spout cap and use the spout
to empty liquid contents. For thicker consistencies,
remove the lid and attachment carefully (by its shaft),
then empty contents from the container.
CAUTION: Blades are not locked in place. If using
the pour spout, ensure the lid is fully locked onto
the blender pitcher.
13 For thicker consistencies, remove the lid and blade
attachment carefully (by its shaft), then empty contents
from the container. To remove the lid, press the release
button on the lid and pull the lid handle up to a 90°
angle and lift the lid off the blender pitcher.
CAUTION: Blades are not locked in place. If
pouring with the lid removed, ALWAYS remove the
blade assembly first.
14 Make sure that the unit is unplugged when not in use.
15 To release the motor base from the counter or table top,
place your hands underneath both sides of the motor base
and gently pull the unit up and towards you. (Fig. 9)
Fig. 9