Placement; De-Registration - Yealink RT30 User Manual

De-registration

1. Long press the program key and reconnect the power adapter.
2. Hold the program key until the three LEDs is red.
De-registration is successful, and the repeater will start to search the base

Placement

To achieve optimum performance for the repeater, it is important to find a
good location.
1. Hold the handset and stand near the base.
2. Make a call, and carry the handset away from the base.
3. Make a note where you start to hear noise on the line, which indicates the
signal is getting weaker.
The optimum location for the repeater is as far from the base as possible
while still maintaining a good signal, or just inside the location where the
noise became noticeable.
Here are a few tips for placing repeaters:
• Choose a raised position for both the base station and repeater wherever
possible.
• When positioning the repeater, avoid obstacles that can interfere with
radio transmission such as thick wall and metal structures that may be in
the coverage area between the base station and repeater.
• Avoid interference from other electrical appliances such as micro-wave
ovens, Hi-Fi equipment, computers etc.
• Keep a minimum of 10 meters between multiple repeaters to avoid
coverage area overlapping.
www.yealink.com
Make a call, then
walk away from the
base to determine
the signal range.
Week signal
range
Good signal
range
Strong signal
range
W60B
Register the RT30 to base
station within the "good"
RT30
signal range.
6