Attach The Base Stand; Multiple Repeaters; Cascade Setup - Yealink RT30 User Manual

Attach the base stand:

1. Align the snap-fits with the corresponding holes and push forward,
snapping them into the holes.
Introduction
Yealink DECT repeater RT30 is designed in accordance with Digital Enhanced
Cordless Telecommunication (DECT) standard. It can be deployed to extend
the range of the Yealink IP DECT phone (for example, W52P, W60B) to cover
areas where reception was previously not available. All the usual handset
functions are supported by the base station in the extended radio range.
The repeater, base station and cordless handset employ wireless connection.
Signals are exchanged without acoustical and visual differences.

Multiple Repeaters

If the DECT link quality of RT30 is in excellent-to-good condition, up to 2
handsets can communicate with the base station.
The repeater can be used to extend the coverage range in all directions or
in a single direction. The automatic handover process is seamless. If the
repeater is placed correctly (overlapping the coverage area of the base
station), the handsets can move freely within the total coverage area while
on a call.

Cascade setup:

RT30 supports a sequential or "daisy chain" layout to extend coverage in a
single direction. Up to 2 repeaters can be installed in sequence.
3
50m/300m
RT30
W60B
RT30
DECT Repeater RT30 User Guide