Yealink RT30 User Manual

Yealink RT30 User Manual

Dect repeater
Hide thumbs Also See for RT30:

Advertisement

DECT Repeater
RT30
User Guide(V1.0)
www.yealink.com

Advertisement

Table of Contents
loading

Summary of Contents for Yealink RT30

  • Page 1 DECT Repeater RT30 User Guide(V1.0) www.yealink.com...
  • Page 2 Check the repeater ID Green Green/yellow Flashing green Modify the repeater ID Green/yellow Flashing red Auto cascade registration Yellow Flashing green Manual cascade registration Yellow Green Flashing red De-register the repeater DECT Repeater RT30 User Guide...
  • Page 3: Wall Mounting

    DECT link quality and LED color. DECT link Color Excellent to good Green Poor Yellow Installation Connect the power for the repeater: 1. Connect RT30 to a power outlet using the included cable and USB power adapter. Wall mounting: www.yealink.com...
  • Page 4 Signals are exchanged without acoustical and visual differences. Multiple Repeaters If the DECT link quality of RT30 is in excellent-to-good condition, up to 2 handsets can communicate with the base station. The repeater can be used to extend the coverage range in all directions or in a single direction.
  • Page 5 All repeaters must be installed within the base station coverage area (up to 300m in unobstructed outdoor areas and up to 50m inside buildings), as shown in the figure below. RT30 RT30 50m/300m RT30...
  • Page 6 2. Set the handset in RT30 repeater mode at the path: Settings->System Settings->Repeater Mode. 3. Set base station in registration mode (Long press paging key on the base station till the first LED flashes). If base station is found, DECT LED will flash yellow.
  • Page 7 Make a call, then walk away from the base to determine W60B the signal range. Register the RT30 to base station within the “good” RT30 signal range. The optimum location for the repeater is as far from the base as possible while still maintaining a good signal, or just inside the location where the noise became noticeable.
  • Page 8 “Easy collaboration, high productivity.” The company’s high- quality UC terminal solutions enhance the work efficiency and competitive advantages of its customers in over 100 countries. Yealink is the world’s second-largest SIP phone provider and is number one in the China market.

Table of Contents