Jura GIGA X8c Instructions For Use Manual page 28

4 Permanent settings in programming mode
Product
Espresso doppio
Pot of coffee
Double products
Cappuccino,
latte macchiato,
espresso macchiato,
flat white,
caffè latte
Portion of milk foam,
portion of milk
Hot water,
hot water for green tea,
hot water for black tea
28
Coffee Amount
strength
10 levels Water: 15 ml – 290 ml
(2 strokes)
Bypass water:
0 ml – 580 ml
10 levels Water: 15 ml – 290 ml
Bypass water:
0 ml – 580 ml
– The amounts set for
the single product are
doubled.
10 levels Water: 15 ml – 290 ml
Bypass water:
0 ml – 580 ml
Milk foam:
0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
Interval: 0 sec. – 60 sec.
– Milk foam:
0 sec. – 120 sec.
Milk: 0 sec. – 120 sec.
– Water: 25 ml – 450 ml
Permanent settings in programming mode always follow the same
model.
Example: Proceed as follows to change the coffee strength for one
espresso.
Precondition: The start screen is displayed.
T Touch 'Espresso'
of possible settings is displayed.
More settings
Temperature (low, normal,
high), left and/or right grinder
(in %), product name, delete/
replace/copy product
Number of strokes (1 – 5),
temperature (low, normal,
high), left and/or right grinder
(in %), product name, delete/
replace/copy product
Temperature (as for single
product), left and/or right
grinder (in %), product name,
delete product
Milk and milk foam tempera-
ture, temperature (low, normal,
high), left and/or right grinder
(in %), product name, delete/
replace/copy/double product
Milk and milk foam tempera-
ture, product name, delete/
replace/copy/double product
Temperature (low, normal,
high), product name, delete/
replace/copy product
for approximately 2 seconds until the list