Jura GIGA X8c Instructions For Use Manual page 21

Preparation of a speciality
coffee with grinder
selection
Example: Proceed as follows to activate the grinder selection.
Precondition: The start screen is displayed.
T Touch ' P '.
'Maintenance status'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Machine settings'
T Press the Rotary Switch.
'Switch off after'
T Turn the Rotary Switch until
T Press the Rotary Switch.
'Beans à la carte'
T Now move your finger across the controller and set it to '1'.
T Touch 'Save'.
'Saved' appears briefly on the display.
'Beans à la carte'
T Touch 'Back' the number of times needed to display the start
screen again.
Example: Proceed as follows to prepare an espresso with coffee
beans from the grinder on the left.
Precondition: The start screen is displayed. 'Beans à la carte' mode
is activated.
T Place a cup under the dual spout.
T Touch ' + ' on the left-hand side several times until the value
is set to '100%'.
E The grinder selection remains active until the setting is
changed by you, even if the GIGA is switched off in the mean-
time.
T Touch 'Espresso'.
Preparation starts. The preset amount of water for espresso
flows into the cup.
Preparation stops automatically. Your GIGA is once more
ready for use.
2 Preparation
'Machine settings' is displayed.
'Beans à la carte' is displayed.
21