Jura GIGA X8c Instructions For Use Manual page 17

Using the product selector view (Rotary Selection): Only some of
the products you can prepare are shown on the start screen. As soon
as you turn the Rotary Switch, more products are displayed in a
product selector view.
Turn the Rotary Switch or move your finger across the display to
bring the desired product into focus. Touch the product or press the
Rotary Switch to start preparation. The following additional prod-
ucts are shown in the product selector view:
U
'Ristretto'
U
'Special'
U
'Espresso doppio'
U
'Hot water for black tea'
U
'2 x Ristretto'
U
'2 x Special'
U
'2 x Caffè Barista'
U
'2 x Lungo Barista'
U
'2 x Cappuccino'
U
'2 x Latte macchiato'
U
'2 x Macchiato'
U
'2 x Flat White'
U
'2 x Caffè latte'
U
'2 x Portion milk'
U
'2 x Portion milk foam'
E The product selector view disappears automatically after
10 seconds if no preparation is started.
E The last product selected always appears first in the product
selector view.
E You can move any of the standard products programmed in
your GIGA to your preferred position on the start screen and
make it one of your favourites. You can duplicate and person-
alise your favourite speciality coffees by giving them a new
product name and individual settings (e.g. amount and coffee
strength) (see Chapter 4 'Permanent settings in programming
mode – Product settings'). Please note that the descriptions
provided in the following sections always refer to the default
settings.
2 Preparation
17