Table of Contents
Advertisement
• Avoid the following actions while recording and burning:
• Locking the workstation.
• Running other applications in full-screen mode or running CPU-intensive programs.
• Distorted lines at top or bottom of screen:
• Clean VCR/camcorder tape heads.
• Adjust VCR/camcorder video tracking. (These lines are not usually visible on a
regular television because a TV typically presents in overscan mode, which causes
the edges of the video to be out of view)
Audio Problems
No Audio
• Check your cable connections to make sure they are secure.
• Verify that you have connected your cables to the ports labeled "Output" on your
video/audio player. *If there are no Output ports available, try using a Headphone
output by way of a headphone-to-RCA (Composite) adapter cable.
• If using a Headphone output, adjust the volume for your audio player.
• Verify that the audio output ports of your video player work by testing them with
your television.
• Check your video and audio device settings from the Record Settings control panel
(see Step Two of the Advanced Mode—Capture section).
Choppy audio:
• Verify your computer meets the program's minimum system requirements.
• Avoid the following actions while recording and burning:
• Locking the workstation.
• Running other applications in full-screen mode or running CPU-intensive programs.
20
Advertisement
Table of Contents
