Table of Contents
Advertisement
A Video Properties window should appear.
In the Video Decoder tab, you will find an option for Video Standard. Use the drop-down
menu to select the Video Standard setting for the tape you are attempting to record.
Click OK when finished, and close all other optional windows. Preview your video tape
using the preview pane. If the video still does not appear in color or changes back to
black and white after clicking Record, proceed with the next adjustment.
Second Adjustment:
Change Video Standard (stand-alone) — honestech™ VHS to DVD 4.0 SE software
includes an additional utility program called Change Video Standard. Before accessing
the utility, be sure to first close the VHS to DVD program. To access the Change Video
Standard utility, click the Start icon in the bottom left corner of your screen and select
"All Programs" from the Start Menu.
From the list, locate and highlight honestech™ VHS to DVD 4.0 SE. Among the four
items that will appear should be Change Video Standard. If the VHS to DVD™ program is
closed, select the Change Video Standard utility to open it.
From the Video Standard drop down menu, select the Video Standard setting for the
tape you are attempting to record. Click OK when finished and then re-start the VHS
to DVD™ 4.0 SE software. Preview your video using the preview pane in the Capture
Screen.
Troubleshooting
This information provided here should assist you in resolving video or audio problems
within the VHS to DVD program. The solutions given are common answers to the
problems listed and are not comprehensive. Some problems may require further
technical troubleshooting to fully resolve.
Installation Problems
Manhattan recommends that you disable any Anti-Virus or other background software
you may have running while you install this software. Failure to do so can cause the
software to exhibit unexpected or unpredictable behavior.
18
Advertisement
Table of Contents
