Related Manuals for Manhattan 150965
Summary of Contents for Manhattan 150965
- Page 1 SATA 3 Gb/S RAID PCI ExPRESS CARD uSER mAnuAl ModelS 150965 & 160377 Model 150965 Model 160377 MAN-150965/160377-UM-1006-05...
- Page 2 SATA 3 Gb/s RAId PCI express ® Card, Model 150965 (2 external ports) or 160377 (2 internal ports). This card lets you upgrade a desktop computer with two SATA 3 Gb/s channels to access external eSATA storage devices, helping you to fully utilize the speed and versatility of eSATA to directly connect eSATA storage devices, a port multiplier or eSATA enclosure..
-
Page 3: What Is Raid
InTRoDuCTIon Before you install this card, it’s recommended that you become familiar with the contents of the SATA RAId 5 manual on the enclosed driver Cd, in the folder: \SATA PCIe_Raid5_2Port\SiI3132\Windows\Gui (or \Raid5 SATA2_4Port\SiI3124\ Windows\Gui). This RAId manual has more information about RAId architecture, features, installation and settings, plus management software for RAId 5 GUI (graphical user interface). -
Page 4: Card Installation
Mirrored-Striping (RAID 0+1, or RAID 10) A Mirrored-Striping Set does just what it says, combining both Striping and Mirroring technologies to provide both the performance enhancements that come from Striping and the data availability and integrity that come from Mirroring. When data is written to a Mirrored-Striped set, instead of creating just one virtual disk as Striping would do, a second, Mirrored virtual disk is created, as well. - Page 5 the “Concatenate” or “Contiguous” option in the Create RAId Group menu. • If 2 disks, don’t select the “Parity RAID” or “Mirrored Striped” setting. • If 3 disks, don’t select the “Mirrored Striped” setting. 1 2. Click “Task Manager” to make sure RAID setting is complete. With RAID5 setting, it can be hours before a component is ready and functions are available, so schedule accordingly. 13. Use device Manager for hard disk initialization, partitioning and formatting. bIoS SETTInG (RAID SETTInG) Creating and deleting RAId sets is a function found in BIoS (Basic Input/output System).
-
Page 6: Resolving Conflict
Creating JBOD Sets 1. As BIOS boots, press <CTRL>+<S> or <F4> to enter the RAID BIOS utility. 2. Select “Create RAId set.” Press <enter>. 3. Select “JBOD (Single).” Press <Enter>. 4. Select “JBOD Drives.” Press <Enter>. 5. Select the RAId size. Press <enter>. 6. Press <Y> to save your settings. Creating a Spare Drive 1. As BIOS boots, press <CTRL>+<S> or <F4> to enter the RAID BIOS utility. 2. Select “Create RAId set.” Press <enter>. 3. Select “Spare drive.” Press <enter>. 4. Select “Spare Drives.” Press <Enter>. -
Page 7: Driver Installation
DRIvER InSTAllATIon Fresh (Initial) Windows Installation 1. Turn the system off. Connect the hard drives to the PCI express Card and position the card in a PCI express slot. Turn the system back on. 2. Insert your Windows CD in the CD-ROM/DVD drive. 3. Press <F6> for third-party SCSI or driver installation at the beginning of text mode installation. Press <S> when setup asks if you want to specify an additional device, and insert the driver Cd. - Page 8 front of “Silicon Image SiI 3132 SoftRaid5 Controller,” the driver has been installed correctly. 3. For information about the devices attached to the card, use the SiICfg utility and select a device from the list. Updating an Existing Driver in Windows 1. Right-click on “My Computer”; select “Properties”; click the “Hardware” tab; click “device Manager.” Then click “SCSI and RAId Controller” and right-click “Silicon Image SiI 3132 SoftRaid5 Controller.”...
-
Page 9: Port Specifications
SPECIfICATIonS Standards and Certifications • FCC • CE • SATA 1.0 • RoHS • WEEE Port Specifications • Type: - Model 150965: 2 eSATA (extermal) I-type - Model 160377: 2 SATA (intermal) l-type • Transfer rate: 3.0 Gbps • Supports 2 independent SATA channels General • 48-bit Large Block Addressing • 2-pin header for LED connection • Supports 1-lane 2.5 Gbps PCI Express • Hot-plug capability • Independent link, transport and data FIFO • Independent command fetch, scatter/gather and command execution • Supports legacy command queuing (LCQ), native command queuing (NCQ), non-zero offsets NCQ, out-of-order data delivery NCQ and FIS-based switching with port multipliers • 31 commands and scatter/gather tables per port... -
Page 10: Warranty Information
WARRANTY INFORMATION eNGlISH: For warranty information, go to www.manhattan-products.com/warranty. deUTSCH: Garantieinformationen finden Sie unter www.manhattan-products.com/warranty. eSPAñol: Si desea obtener información sobre la garantía, visite www.manhattan-products. com/warranty. FRANçAIS: Pour consulter les informations sur la garantie, visitez www.manhattan-products. com/warranty. PolSKI: Informacje dotyczące gwarancji znajdują się na stronie www.manhattan-products. com/warranty. ITAlIANo: Per informazioni sulla garanzia, accedere a www.manhattan-products.com/ warranty. eN MéXICO: Poliza de Garantia MANHATTAN — Datos del importador y responsable ante el consumidor IC Intracom México, S.A. de C.V. • Av. Interceptor Poniente # 73, Col. -
Page 11: Regulatory Statements
REGULATORY STATEMENTS FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of Federal Communications Commission (FCC) Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions may cause harmful interference to radio communications. - Page 12 Copyright © MANHATTAN...