Contents Before you begin... Important Customer-service information If You Need Help... Important safety instructions Related equipment safety Important information about safety instructions Installation requirements Checklist Prepare to install drawer Installation planning Warming drawer dimension Installation instructions Install support platform in cabinet Electrical connection Remove and reinstall drawer Verify warming drawer operation...
Before you begin... Important Installer • In the interest of safety and to minimize problems, read these installation instructions completely and carefully before you begin the installation process. • Leave these installation instructions with the customer. Customer • Keep these installation instructions for future reference and the local electrical inspector’s use.
Customer-service information If You Need Help... For answers to general questions or installation issues, call your Dacor® dealer or Dacor Customer Service. For repairs to Dacor appliances under warranty, call the Dacor Distinctive Service line. Before calling, have available the appliance's model and serial numbers, which are on the Product Data Label (drawer front, interior side).
• The Important Safety Instructions and warnings in these instructions are not meant to cover all potential issues. Use common sense when installing, maintaining, and operating this appliance. • Always contact the Dacor Customer Service Team about problems and conditions that you do not understand. English 5...
Page 6
Important safety instructions To reduce risk of fire, electric shock, serious injury or death when using your appliance, follow basic precautions, including the following: WARNING • Clean the warming drawer thoroughly before operating it for the first time. • Do not use harsh scrubbers, cleaners, or detergents, which may permanently mar the unit's finish.
Page 7
Ensure that anyone who uses the unit knows how to operate it properly. • Do not tamper with the controls. • Never let anyone sit, stand, or climb on the open drawer. • Do not leave children unattended near the unit. •...
Installation requirements Checklist WARNING To ensure proper installation, the installer should complete this checklist. The owner shall verify proper installation, the importance of which cannot be overstated. Was the mounting platform installed as instructed Was a properly grounded, dedicated, three-prong outlet installed for the ...
Verifying Package Contents The items in this section are provided with the warming drawer. If these items are not with the unit, contact your Dacor Service Center or Dacor Customer Service (pg. 4). 7 mounting screws (PN83569) Half Shelf (PN110346)
Installation instructions Install support platform in cabinet Provide a platform (100 lb. load capacity) within the cabinet to support the unit. The platform must be installed level and straight. The platform must be flush with the cutout at the front of the cabinet. (See the graphic.) There is no way to level the warming drawer after installation.
Electrical connection WARNING Electrical Shock Hazard IMPORTANT: The unit has a three-prong, grounding plug to prevent possible electric shock. If a two-prong electrical outlet is available, the owner must have it replaced with a dedicated, properly grounded, three-prong electrical outlet. To avoid an electric shock hazard, DO NOT: •...
Page 16
Installation instructions Nominal Electrical Supply Requirements 120 Vac, 60 Hz, 15 Amp., dedicated circuit The warming drawer is supplied with a 40” (101.6 cm) power cord with a three-prong grounded plug. Total Connected Load 0.5 kW (4 Amp.) • The owner shall ensure that a qualified electrician performs the installation, which must comply with the latest revision of the National Electric Code ANSI/NFPA 70, and local codes and ordinances.
Remove and re-install drawer WARNING • To avoid personal injury caused by the unit being pulled from its cutout when the drawer is opened, secure the chassis to the cabinet as instructed. (See pg. 14.) • The unit should be secured to the cabinet cutout while the drawer out of the unit. •...
Page 18
Installation instructions Remove the drawer from the appliance Open the drawer fully, and remove clamp screw. , and detach the . Pull out clamp connector. Connector from the . Remove the screw Drawer ( sides, near the front. Remove the drawer. English...
Page 19
Re-installing the drawer Extend both rails, and pull out the cable (right side) so the connector hangs outside the frame. Put the drawer on both rails, and slide it in until it engages under the rails' rear clips. Clip on slide Slide .
• If the unit still does not work, contact an authorized Dacor servicer: (800) 793-0093. • Do not try to repair the unit yourself. Dacor is not responsible for service required to correct a faulty installation.