• Model OWD24, when installed as a towel warmer, must be • Always contact the Dacor Customer Service Team about installed indoors and have the supplied wire rack installed in problems and conditions that you do not understand.
Page 7
Installation Specifications Installing the Support Platform Chassis Provide a platform (100-lb. load capacity) within the cabinet face upon which the warming drawer will be supported; 3/4” (1.9 cm) thick plywood is recommended. The platform must be installed level and straight. (No provision is made for Support leveling the drawer after installation.) platform...
Installation Instructions Installing the Chassis WARNING • To avoid personal injury caused by the appliance 1. Grasp the warming drawer chassis on opposite falling forward when the drawer is opened, secure sides and slide it partially into the cabinet opening. the chassis to the cabinet and support platform as Temporarily support the chassis in place so that it will instructed.
Installation Instructions Re-installing the Drawer Installing the Towel Rack (OWD24 Only 1. Pull the drawer slides all the way out of the drawer opening. Model OWD24 is designed so that it can be used as a 2. Gently lower the drawer between the extended slides towel warmer if desired.
Do not attempt to repair the appliance yourself. Be sure to have the model and serial numbers available when you call. See page II for model/serial number location. Dacor is not responsible for the cost of correcting problems resulting from a faulty installation.
Need help?
Do you have a question about the DWD30 and is the answer not in the manual?
Questions and answers