Verification Of The Alarm Trigger Ratio Coverage; Radio Trigger Elliot - Doro CareMobile User Manual

Verification of the alarm trigger ratio coverage

CAUTION
Always verify the functionality and coverage ratio after installation and
programming.
• Hold down the green button for approximately four seconds until the
unit emits a beep, release the button. The indicator light Power on
! flashes green.
•
Push the radio trigger. Once the Doro CareMobile receives the radio
signal, you will hear a tone.
Radio trigger Elliot uses two-way radio communication, this means that
when Doro CareMobile receives an alarm from Elliot it will send an confir-
mation receipt This is indicated on Elliot by indicator light change from
red to green. If Elliott doesn't get any confirmation, the alarm will be re-
peated. Elliot has two programmable buttons.
Elliot can be worn using a wristband, neckband or pocket clip. The Doro
Care Easy Press Concept (EPC) accessory simplifies use for persons with
reduced dexterity to activate an alarm.
English

Radio trigger Elliot

10