Microscan MS-3 CCD Quick Start Manual page 5

Step 4 — Select Reader Model in ESP
When you start the
program, the following
menu will appear.
1. Select MS-3 CCD
from the menu and
click OK. If you do
not want to make
this selection every
time you load ESP,
uncheck "Show this
window at Startup".
2. Select the default
name (MS-3 CCD-1,
for example) or type
in a file name of your
choice and click
3. Click Yes when the
following dialog box appears:
Note: If you need to select another model later, you can find it in
App Mode under Model on the menu bar.
MS-3 CCD Reader Quick Start Guide
OK.
5