Dc & Ac Voltage Measurement; Dc Current Measurement - Mercury MTB02 User Manual

Resistance
RANGE RESOLUTION
200Ω 0.1Ω
2000Ω 1Ω
20kΩ 10Ω
200kΩ 100Ω
2000kΩ 1kΩ
MAXIMUM OPEN CIRCUIT VOLTAGE: 3V
OVERLOAD PROTECTION: 15 seconds maximum 220Vrms
OPERATING INSTRUCTIONS
DC & AC VOLTAGE MEASUREMENT
1. Connect red test lead to "VΩmA" jack, black lead to "COM"
jack.
2. Set RANGE switch to desired VOLTAGE position, if the voltage
to be measured is not known beforehand, set switch to the
highest range and reduce it until satisfactory reading is
obtained.
3. Connect test leads to device or circuit being measured.
4. Turn on power of the device or circuit being measured voltage
value will appear on Digital Display along with the voltage
polarity.

DC CURRENT MEASUREMENT

1. Red lead to "VΩmA". Black lead to "COM" (for measurements
between 200mA and 5A connect red lead to "5A" jack with fully
depressed.)
ACCURACY
± (1.0% of rdg + 10D)
± (1.0% of rdg + 4D)
MTB01 & MTB02 User Manual