To attain the electromagnetic compatibility (EMC) requested in the EMC Guideline
of a complete plant (control and drive engine), EMC measures on the part of the
control manufacturer and user (including machine tool manufacturer) are required.
To secure the EMC, you must pay attention to the:
product-specific EMC measures contained in
the EMC Guidelines,
to project or operate only permitted combinations and
to use the accessories provided in the product-specific documentation
(e.g. ready-made wiring) or equivalent.
© Siemens AG, 2004. All rights reserved
EMC Installation Guideline – Planning Guide (EMV) – 03.2004 Edition
(in the room with
Securing the EMC
EMC compatible total system