Intermediary Vesa Mount Plate (Optional) - Fujitsu STYLISTIC Q508 Manual

Intermediary VESA Mount Plate (optional)

The VESA mounting attachment kit contains the following components: The
VESA mounting attachment and four type M2.5XL5-1 screws.
For Tablet PC models with a VESA Shell (screw holes), an optional VESA attachment,
the intermediary VESA Mount Plate, can be attached to the rear side.
The intermediary VESA Mount Plate can be used, for example, to secure the Tablet PC
to a cart, counter or stand with the corresponding screw holes.
• The housing option that supports the intermediary VESA mount plate is
not compatible with the protective TPU cover and folio cover accessory
components. In addition, the respective VESA housing does not support
the following: IP54, fingerprint sensor or 4G.
• Use the appropriate tool of the correct size to secure the screws.
• Keep the screws out of the reach of children.
► Remove the covers from the screw holes on the rear of the Tablet PC (1).
► Position the intermediary VESA Mount Plate on the Tablet PC (2). Make sure
that the screw holes on the Intermediary VESA Mount Plate and on the Tablet
PC are aligned exactly on top of each other.
► Secure the Intermediary VESA Mount Plate using the screws (3).
Fujitsu
1
1
1
Accessories for your Tablet PC (optional)
1
3
3
3
3
2
53