Front Humidity Indicator - ElectrIQ EDD8L User Manual

SMART Mode
This mode ensure minimum human intervention and maximum savings. Smart mode sets the
desired humidity for the unit to 55% RH which is the recommend humidity for normal
households, and adjusts the fan speed depending on the current humidity of the room,
following the table below.
Above 70%
Between 55% and 70%
Less than 55%
Air purification Mode
This mode runs the fan without dehumidifying the air. This is great for purifying the air
when the desired room humidity has been reached, especially when the optional HEPA filter
is installed. If using a HEPA filter while dehumidifying please note that performance of the
unit may be reduced by 10%.

FRONT HUMIDITY INDICATOR

The ElectrIQ EDD8L in equipped with an intelligent humidity display on the front, giving the user an
immediate visual indication of the ambient humidity. The front LED's will change colour to indicate the
Please note: This indicator is not shown during sleep mode.
Unit will run in TURBO mode
Unit will run in Sleep Mode
Unit stops for 30 minutes before rechecking rooms humidity. Will not restart
until humidity is above 55%
current humidity level
Blue light – room humidity > 70%
Green light – room humidity 50~70%
Red light –room humidity < 50%
8