ElectrIQ EDD8L User Manual page 7

"Full Water" Indicator
The red light will flash when the water tank requires emptying, or when the water tank is not
correctly located within the unit
On Indicator
Green Light – Indicates the unit is on and the heating element is working
Red Flashing Light – Anti Tip sensor, detecting the unit is not upright. If the unit has been
tipped or tilted, do not use for at least 24 hours to allow it to dry out.
Fan Speed Button
Used to select the fan speed, the current speed is indicated by the LED Lights above the
button.
SLEEP – The unit will run in low fan speed, with a lower heat, ensuring the unit runs as quietly
as possible
STANDARD – The unit will run at medium fan speed, with the high heat setting
TURBO – The unit will run at high fan speed, with the high heat setting
Note: Once the air has reached the desired humidity setting, the heater will stop, but the fan will continue
to operate at the set speed for a short period then the unit will stop, resuming operation after 30 minutes
when will check humidity again. If humidity in the room is < set target than the dehumidifier will go to
standby for another 30 minutes; otherwise if humidity in the room is > set target then the dehumidifier will
start dehumidifying. This process ensure energy savings while maintaining the set humidity.
Laundry Mode
This mode is ideal for creating a great environment for drying clothes. The unit will work for
8 hours continuously with the desired humidity set at 40% before resting for 30 minutes. The
unit will then check the humidity of the room. If it is above 40% the unit will work for
another 8 hours before repeating the process. If the humidity of the room is found to be
below 40%, the unit will rest for another 30 minutes before rechecking the humidity of the
room. The LED above the button is lit when Laundry Mode is selected.
Humidity Button
This Allows the user to select the desired humidity for the room. The button should be
repeatedly pressed to cycle between the different options CO ( Continuous Mode ), 40%, 50%
60% or 70% RH
Please Note: After 8 hours of the heater running continuously, the unit will rest for 30 minutes before
resuming the previously selected operation.
Timer Button
With the unit Turned On – Repeatedly press the Timer button to select in how many hours
time you require the machine to turn off. The number of hours is displayed on the Display
Window
With the unit Turned Off
require the machine to turn on. The number of hours is displayed on the Display Window
The timer can be deactivated once set, by repeatedly pressing the timer button until 00 is shown on the
Display Window.
Repeatedly press the Timer button to select in how many hours time you
7