Positioning; Water Drainage - ElectrIQ EDD8L User Manual

POSITIONING THE DEHUMIDIFIER
The positioning of your dehumidifier can have a large impact on its performance and efficiency. In positioning the
dehumidifier please ensure the circulation of air is not restricted around the unit. Please observe the figure below
showing the clearance which is required around the unit
Your ElectrIQ dehumidifier will begin to protect your home from the harmful effects of excessive moisture as soon as
it is turned on. Excess moisture travels throughout your home, in the same way that cooking smells spread around
the house. For this reason, the dehumidifier should be positioned in a central and clear location so that it can draw
this moist air towards it from all over the home. A warm hallway or landing is an excellent position for your
dehumidifier. If possible, leave interior doors ajar to allow air circulation between rooms.

WATER DRAINAGE

When the water tank is full, the unit will stop automatically. When this happens the water full indicator light
will blink on the control panel.
Alternatively, if you have a serious problem in
one area you can begin by positioning the
dehumidifier there and moving it to a more
central location at a later date. For the most
effective use, run your dehumidifier with any
external doors and windows kept closed.
Please note the unit should not be placed
directly against a radiator or other heat
source.
When positioning your ElectrIQ dehumidifier,
ensure that it is placed securely on a level
surface clear of any obstacle that may limit the
air movement.
This dehumidifier is designed only for indoor
residential / office applications and any
commercial or industrial use will invalidate the
warranty. Place the dehumidifier on a flat dry
surface. Do not use outdoors.
To empty the tank, please follow the steps:
1. Hold the unit with one hand to make it stand firmly.
2. Pull out the tank squarely from the unit.
3. Grasp the water tank handle, remove the cover of
the tank, and empty the water from the drain.
After the tank has been emptied, return the water tank to
its position, and make sure it is properly inserted, so that
the 'water full' LED is not lit, and the unit returns to
normal operation
11