Troubleshooting - Pyle PLCMDVR46 User Manual

Troubleshooting

Under normal operating conditions, such as product problems, please consult the solution:
Cannot boot:
Check if the recorder is correct and the car charger, in manual boot, check whether the low battery needs recharging. As a
result of the program can be passed by the RESET key, restore to factory settings.
The camera automatically stop shooting, or non-circular camera:
The HD video data is huge, possibly because the memory card reader cannot keep up the pace. Please use the high speed
Memory card such as high speed C10 card.
Non circular camera also has the possibility in the gravity sensing function if open. Car memory les is locked.Please close
the gravity sensing function and reformat memory card.
Set up recycling camera is not the same:
Check if the open mobile detection function is open. Long camera motion detection depends on the picture with no
movement.
Video and Image is not clear:
Check if the lens have nger print. Clean the lens surface before recording, keep it clean and tidy.
Sometimes the e ect is good or bad:
Camera e ect has a very big relation to the lighting environment and light intensity.
The images has fringe interference:
This is because of the mistake of "light frequency" under uorescent light generated.
Reset the machine
Press "RESET" button to restore from start.
12
www.PyleUSA.com