Differentiated Heat Cut-Out - Danfoss ECL Comfort 310 Installation Manual

Installation Guide

2.2 Differentiated heat cut-out

To set differentiated cut-out parameters for a heating circuit for
"Summer" and "Winter" go to "Heat cut-out":
(MENU > Settings > Heat cut-out)
This function is active when the dates for "Summer" and "Winter"
are different in the "Heat cut-out" menu.
Extended heat cut-out setting
Parameter ID
11393
Summer day
11392
Summer month
Summer cut-out 11179
Summer filter 11395
Extended winter cut-out setting
Parameter ID
11397
Winter day
11396
Winter month
Winter cut-out 11398
11399
Winter filter
The above settings of the dates for the cut-out function are only
to be done in the heating circuit 1 and are valid for other heating
circuits in the controller as well, if applicable.
The cut-out temperatures as well as the filter constant are to be set
individually per heating circuit.
Danfoss District Energy
ECL Comfort 210 and 310, extended heat cut-out
Setting range Factory
setting
1 ... 31 20
1 ... 12
OFF / 1 ... 50°C 20°C
OFF / 1 ... 300 250
Setting range Factory
setting
1 ... 31 20
1 ... 12
OFF / 1 ... 50°C 20°C
OFF / 1 ... 300 250
5
5
The heating cut-out is only active when the controller mode is in
scheduled operation. When the cut-out value is set to OFF, there is
no heating cut-out.
VI.GU.U1.02 DEN-SMT/DK 5