Mitsubishi SD200U Service Manual page 68

5. Removal of LAMP POWER PCB ASSY,
POWER SUB PCB ASSY and FAN PCB
ASSY
1. Remove the Front Grill following "1. Removal of FRONT
GRILL".
2. Remove the Top Case Assy following "2. Removal of
TOP CASE ASSY".
3. Remove the SIGNAL PCB ASSY and FORMATTER
PCB ASSY following "3. Removal of SIGNAL PCB
ASSY and FORMATTER PCB ASSY".
4. Remove the Power Assy following "4. Removal of
POWER PCB ASSY, TERMINAL PCB ASSY and PFC
PCB ASSY".
5. Remove the seven (a) screws and the LAMP POWER
ASSY as shown in Fig. 3-4-1.
6. Remove the (b) hook and the LAMP POWER PCB
ASSY as shown in Fig. 3-4-2.
7. Remove the (c) hook and the POWER SUB PCB
ASSY as shown in Fig. 3-4-2.
8. Remove the (d) hook and the FAN PCB ASSY as
shown in Fig. 3-4-2.
ax7
LAMP POWER
PCB ASSY
Chassis Flame
- 10 -
LAMP POWER ASSY
Fig. 3-4-1
POWER SUB
PCB ASSY
FAN PCB ASSY
c x1
d x1
b x1
Fig. 3-4-2