Table of Contents
Advertisement
Adjustment with Microsoft
1. Starting
1. Start Windows
95/98/Me.
2. Double click [Accessories] folder.
3. Double click [Hyper Terminal] folder.
4. Double click [HyperTrm] icon.
2. Hyper Terminal Setting
1. Click [Properties] in File menu on the Hyper
Terminal window.
[Connection Properties] window will open.
Set as follows on this window.
2. Click [Call] in communication menu on the
window to connect this PROJECTOR.
3. Adjustment
Enter the adjustment command and the adjustment value on the Hyper Terminal window in capital alphanumeric letters with
keyboard and press the enter key.
4. Writing Adjustment Value
The adjustment value entered using the above-mentioned procedure will be saved in EEPROM automatically.
5. Close Window
Click the closing button placed upper right of the window to close the Hyper Terminal.
Close Windows
95/98/Me after closing all opening windows.
®
Windows
®
95/98/Me Operating System
Item
Connect using
Port settings
Settings
ASCII setup
- 2 -
Port (COM1-COM4)
: Bits per second
9600
: Data bits
8 bit
: Parity
None
: Stop bits
1
: Flow control
None
: Emulation
VT100
: ASCII Sending
Send line ends with line feeds
Echo typed characters locally
Line delay
Character delay : 10 milliseconds
: ASCII Receiving Append line feeds to incoming line ends
Setting
: 1000 milliseconds
Advertisement
Table of Contents
