3
Maintenance, Repair, and Troubleshooting
Status Indicators
The instrument status indicator indicates one of four possible instrument
conditions:
• When the status indicator is OFF, the instrument is in a prerun condition,
• A green status indicator indicates the instrument is performing an analysis
• A yellow status indicator indicates a not-ready condition. The instrument
• An error condition is indicated when the status indicator is red. An error
• A flashing red status indicator indicates a severe error during the startup
26
and is ready to begin an analysis.
(run mode).
is in a not-ready state when it is waiting for a specific condition to be
reached or completed, or while a self-test procedure is running. The next
programmed injection will be inhibited until the not-ready condition has
been cleared.
condition indicates the instrument has detected an internal problem which
affects correct operation of the instrument. Usually, an error condition
requires attention (for example, leak, defective internal components). An
error condition always interrupts the analysis and prevents the next run
after the current run is finished.
procedure of the module. Call your local service provider for assistance
upon observing this error condition.
Status Indicators
Agilent 1200 Series Valves