Konica Minolta bizhub C253 Installation Manual page 5

10. Place the control panel cable into the cover A
furnished with the machine. Secure the cover
with screws (three screw A's furnished with the
machine).
11. Remove the protective material from the control
panel cable.
VII. Installing the IU
1. Open the front door.
A02EIXC022DB
2. Tilt the IU to the left and, in that condition, shake it
over a small stroke twice. Then, tilt the IU to the
right and, in that condition, shake it over a small
stroke twice.
A02EIXC095DA
3. Remove the top cap and protective sheet of the
IU.
E-5
A02EIXC023DA
A02EIXC024DB
A02EIXC025DA