Axis JS007WQK Installation Manual page 8

1.3 Trigger Display:
1.3.1. When the green wire is activated, the monitor
automatically switches to CAM1
1.3.2. When the white wire is connected to the positive wire of
the left turn light, the monitor automatically switches to CAM2
(left side camera) when the left turn is activated.
1.3.3. When the blue wire is connected to the positive wire of
the right turn light, the monitor automatically switches to CAM3
(right side camera) when the right turn indicator is activated.
1.3.4. When the brown wire is connected to the positive wire of
the back-up light, the monitor automatically switches to CAM4
(back-up camera) when the back-up light is turned on. The
distance grid will also be displayed.
1.3.5. When the yellow wire is connected to the positive wire,
the monitor automatically switches to quad or split display.
Connection depends on the application request.
Cameras displayed are selected via settings menu.
1.4 Volume Selection Under Quad View:
1.4.1. Check the volume icon on the top right area on single channel. It stands for audio out
for the selected channel.
1.4.2. Press or
audio out.
to select the channel for
CAM1
CAM3
8
CAM1
CAM2
CAM3
CAM4
CAM2
CAM4